Inspired  by  CLIPPER-II  performance,  T&I has come forward with yet another startling innovation - DYNAM Electro  Control Automatic Milling Machine. Dynam comes with all the advanced  engineering  features of CLIPPER-II plus many more. Its fully automatic control system ensures complete error free milling even when proper attention is absent.

BED - Heavy  graded C. I.  bed,  stress  relieved,  hand-scraped  and ribbed, with ISO trapezoidal profile.

HEADSTOCK - Heavy walled, fitted with phosphor bronze worm - wheel and hardened and ground shafts, firmly seated on bed.

LEAD - SCREW - Alloy steel, precision machined, self-cleaning.

FORWARD DRIVE - 2 Speeds,  belt driven through a heavy-duty helical gearbox driving the lead - screw.


Overall Dimensions
Length
2760 mm (9.20 feet)
Width
1260 mm (4.25 feet)
Height
1500 mm (5.00 feet)
Weight
Gross (approx)
2600 KG.
Net (approx)
2000 KG.
Motors
Forward Feed
0.56 KW (0.75 HP) / 925 RPM
Reverse Feed
1.12 KW (1.50 HP) / 925 RPM
Milling Cutter 0.75 KW (1.00 HP) / 925 RPM
Coolant Pump 0.10 KW (0.13 HP) / 2900 RPM
Cutter Auto Feed Retract 0.03 KW (0.05 HP)
TOTAL 2.56 KW (3.43 HP)
No of speeds of lead screw Two forward and one rapid reverse

TIME SAVING - Milling time is reduced by more than 25%

VASTLY IMPORVED QUALITY- Accurate, automatic indexing and cutter movement.

LABOUR SAVING - Since  one person can operate a chasing machine while the DYNAM takes care of the                            milling.

Full automation, cutting down milling time by more than 25%.

Auto cutting - uniformly in milling depth.

Auto indexing - improves quality as indexing error is impossible.

Auto Tool Retracting, reversing & Resetting - saves time and labour.

Auto recycling and auto stop.

Manual back up for emergency operation
CHECKMATE - A handy  gadget  specially  developed  by T&I  enable  you  to  measure   accurately  the difference  of  depth between milling and chasing grooves. An important factor for good CTC cuts. The kit includes an adjustable microscopic scale to measure the shoulder and slope length for maintaining correct shoulder to slope ratio. A must for every roller sharpening workshop and factory.

MOBILE CRANE - A specially  designed crane for loading, unloading and carrying CTC rollers. Mounted on poly wheels with efficient steering mechanism for ready maneuverability. Built-in wire rope winch.

ROLLER CHECKING JIG - For  checking the meshing of CTC rollers. Mobile mounted on castor wheels. Jig is suitable for roller upto 48" width.

TOOL & CUTTER GRINDER - A special  purpose machine for regrinding of CTC Chasers and Milling Cutters. Complete with 0.5 HP / 3000 RPM Motor and Starter. Mounted on fabricated steel pedestal.